You are here: Products \ Product Information
Categories
Product Information
DRILL HAMMER 18V BL DHP487Z
Product Specifications
Ordering Code:6671671
Mfr Code:DHP487Z
Brand:Makita
Product Features
- Compact Design for improved handling and control the overall length has been reduced by 12mm vs. the previous model. At only 164mm in length this is the shortest hammer drive drill in the 18V LXT lineup.
- 3 Drilling Modes screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 40Nm max. torque. Hammer Drilling mode (rotation with hammering) for drilling in masonry up to a maximum 13mm hole diameter.
- LED Joblight high brightness twin LED joblight with pre-glow and after glow functions. Illuminating the working area for greater visibility during application
- 2 Speed Mechanical Gearing high speed mode produces 1,700rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation.
- Durable aluminium gear housing highly durable aluminium diecast gear housing protects the tool from potential damage that may occur on a jobsite.
- XPT Extreme Protection Technology protects the tool against dust & moisture even in the harshest jobsite conditions, increasing durability.
- Impact Rate:
- Hi: 0 - 25,500ipm
- Lo: 0 - 7,500ipm
- Max. drilling capacities in masonry: 13mm
- Max. drilling capacities in steel: 13mm
- Max. drilling capacities in wood:
- Auger bit: 36mm
- Self-feeding bit: 35mm
- Hole saw: 51mm
- Max. lock torque: 40Nm
- Max. peak torque:
- Hard: 40Nm
- Soft: 25Nm
- No Load Speed:
- Hi: 0 - 1,700rpm
- Lo: 0 - 500rpm
- Skin weight: 1.1Kg
- Voltage: 18V
- Weight (with battery): 1.7Kg
Additional Information
The Makita 18V LXT Sub-Compact Brushless Hammer Driver-Drill (DHP487) is a drilling and driving solution with significantly less weight. The 18V Sub-Compact Hammer Driver-Drill is part of a new class of compact, with the size and weight of lower voltage tools but with the performance, power and compatibility of 18V. The DHP487 has an efficient brushless motor with two speed settings and dual L.E.D. lights to illuminate the work area. At only 164mm and 1.7kg. (with battery, sold separately) it's a drilling and driving solution with superior comfort and handling.