You are here: Products \ Product Information
Categories
Product Information
SEAL DOOR BOTTOM AUTOMATIC IS8011SI SILVER 820MM
Product Specifications
Ordering Code:100233357
Mfr Code:IS8011SI-0820CA
Brand:KILARGO
Product Features
- Seals for this designation are designed to control smoke at ambient temperature conditions.
- When installed as per our instructions, these seals offer very low frictional forces, thereby eliminating any increase to the opening and closing forces of the door an important consideration when meeting the requirements of AS1428/1.
- Designed to contain smoke at 200 degrees C for 30 minutes.
- Testing for door assemblies incorporating these seals has been conducted to AS1191 and/or ISO140 Part 3/ISO10140.2.
- SteriTouch antimicrobial seals are designed to safely reduce the growth of harmful organisms such as bacteria, mould and fungi.
- Reducing air movement within buildings assists in improving the overall energy efficiency of the building.
- Seals for this designation are designed to conform to the NCC Specification C3.4 for Smoke Doors
- Seals for this designation have been tested in accordance with AS1530/7 for smoke leakage, providing ambient or medium temperature leakage rates across various pressures.
- Fire tests to AS1530/4 have been conducted on one or more proprietary fire door constructions to show that the addition of these seals will not affect the already established fire resistance levels of the fire doors. Strict compliance with AS1905/1 requires each door type to be tested with each item of hardware. For each project, please check with the respective fire door manufacturer to verify that their door construction has the relevant listing for Kilargo Integrity seals.
- 820mm seal cuts to 600mm
Additional Information
A medium duty, automatic door bottom seal which can be face-fixed or semi-rebated to the bottom edge of single action doors. It operates automatically by a spring loaded mechanism which lifts the seal clear of the floor as soon as the door is opened.
The seal is fixed to the face of the door bottom using the ferrules and mounting screws provided. When the seal is to be semi-rebated, the seal is mounted into a 35mm deep x 14mm wide machined groove in the side of the door where the seal is to be positioned. The seal operates automatically by pressure against the door jamb on its adjustable strike button. The seal contains a high efficiency mechanism to assist with the closing force requirements detailed in AS1428/1 (Design for Access and Mobility).
Aesthetic, nylon push-fit end plates ensure longevity of the seal mechanism.
The seal is fixed to the face of the door bottom using the ferrules and mounting screws provided. When the seal is to be semi-rebated, the seal is mounted into a 35mm deep x 14mm wide machined groove in the side of the door where the seal is to be positioned. The seal operates automatically by pressure against the door jamb on its adjustable strike button. The seal contains a high efficiency mechanism to assist with the closing force requirements detailed in AS1428/1 (Design for Access and Mobility).
Aesthetic, nylon push-fit end plates ensure longevity of the seal mechanism.