You are here: Products \ Product Information
Categories
Product Information
SEAL FIRE DOOR UPGRADE CLEAR ANODISED 920MM FDBU20
Product Specifications
Ordering Code:100230364
Mfr Code:FDBU20-920CA
Brand:KILARGO
Product Features
- Can provide up to 2 hours fire resistance when fitted to the bottom of proprietary fire doors.
- Non compliant fire doors can be salvaged.
- Avoids expensive door build-ups or door replacements.
- Cost-effective solution.
- Easy retro-fit installation.
- No need to remove the door during installation.
- To seal gap sizes up to 20mm maximum, under nom. 35mm and 45mm proprietary doors
- Standard lengths: 820mm, 920mm, 1220mm
- Colours: Clear Anodised (Silver) with grey gaskets
- The FDBU20 is supplied with pre-drilled slotted holes and screws for easy application onto the bottom of door leafs.
- Fully tested to AS1530 Part 4 for up to 2 hours on proprietary fire door assemblies in accordance with AS1905 Part 1.
- Conforms with BCA Specification C3.4 smoke sealing requirements
- NB: Check with your door manufacturer for approvals.
Additional Information
Retrofit intumescent fire door bottom upgrade seals.
Used to upgrade existing fire doors where door bottom gaps exceed the allowable 10mm as per AS1905/1.
These products consist of an anodised aluminium profile, flame retardant smoke, draught and light excluding silicone gasket and integral high performance intumescent fire seals
Used to upgrade existing fire doors where door bottom gaps exceed the allowable 10mm as per AS1905/1.
These products consist of an anodised aluminium profile, flame retardant smoke, draught and light excluding silicone gasket and integral high performance intumescent fire seals